TM 5-3800-205-23-3
WATER PUMP HYDRAULIC MOTOR REPLACEMENT - CONTINUED
0037 00
INSTALLATION - CONTINUED
9.
Install new O-ring (6) to elbow fitting of hose assembly (1).
10.
Install hose assembly (1) to hydraulic motor (2) with hose coupler (5), four new lockwashers (4), and nuts (3).
11.
Repeat steps 9 and 10 to install other hose assembly (1).
3,4
2
1
1
6
(HIDDEN)
5
12.
Connect quick disconnect hoses at top of tank (TM 5-3800-205-10-2).
13.
Install toolbox (WP 0019 00).
14.
Install rear steps (WP 0018 00).
15.
Fill hydraulic reservoir, as required (Refer to Unit PMCS in TM 5-3800-205-10-2).
END OF WORK PACKAGE
0037 00-6
