TM 5-4610-223-12
(2)
Remove two screws (4, fig. 4-41) and pull plate (5) ann gasket (6) away from switch (3).
(3)
Remove two terminal screws (7) and unscrew nut (1) and pull wires (8) from switch (3).
(4)
Unscrew the connector (2) from the switch (3).
c.
Installation.
(1) Install nut (1, fig. 4-41) and connector (2) on cable and push wires (8) into switch (3).
1.
Connector nut
5.
Cover plate
2.
Connector
6.
Gasket
3.
Switch housing
7.
Terminal screw (2 reqd)
4.
Screw, machine, No. 8-32 x
8.
Wires
1/4 in. (2 reqd)
Figure 4-41. Low Water Level Sensitive Switch, Removal and Installation.
(2)
Connect wires to terminals and secure with terminal screws (7).
(3)
Tighten connector (2) in switch (3) and tighten nut (1).
(4)
Position cover plate (5) on switch and secure with screws (4).
(5)
Attach switch (1, fig. 4-40) to bracket (2) with screws
(3)
and washers (4).
4-94
