TM 5-4610-223-12
Legend for figure 2-6:
1.
Storage tank-to-
21.
Pipe elbow, 1 l/2 in.,
distribution pump hose,
90 degree (2 reqd)
1-1/2 in.
22.
Pipe nipple, 1 1/2 x 1/34 in.
2.
Adapter, 1 1/2 in. male
(2 reqd)
npt to 1 1/2 in. female
23.
Adapter, 1 1/2 in.
male to
npsh (2 reqd)
1 1/2 in.
male npt to 1 1/2
3.
Gate valve, 1 1/2 in.
in. male npsh (2 reqd)
4.
Adapter, 1 1/2 in. male
24.
Float
npt to 2 in. female npsh
25.
Strainer, 1 1/2 in.
female
5.
Male outlet second storage
npsh
tank, 2 in. npsh
26.
Water supply source
6.
Second storage tank
27.
Raw water pump suction hose,
7.
Second storage tank female
1 1/2 in.
inlet, 2 in. npsh
28.
Raw water pump
8.
First storage tank to
29.
Van body erdolator waste water
second storage tank hose,
outlet hose adapter
2 in. 30.
Van body raw water inlet hose
9.
Adapter, 2 in. male npt
adapter
to 2 in. male npsh
31.
Truck chassis ground rod and
(2 reqd)
cable
10. Gate valve, 2 in.
32.
Generator and raw water pump
11. First storage tank female
cable inlet
outlet, 2 in. npsh
33.
Distribution pump electric
12. First storage tank
cable
13. First storage tank male
34.
Generator cable
outlet, 2 in. npsh
35.
Trailer ground rod and cable
14. Filter hose, 1 1/2 in. to
36.
Trailer mounted generator set
first storage tank
37.
Nozzle, 1 1/2 in.
female npt
15. Truck mounted water
(2 reqd)
purification unit
38.
Adapter, 1 1/2 in.
male npt to
16. Van body filtered water
1 1/2 in.
male npt (2 reqd)
outlet hose adapter
39.
Distribution pump discharge
17. Van body filter waste
hose, 1 1/2 in. (2 reqd)
water outlet hose adapter
40.
Siamese connection, single
18. Cable outlet
end, 1 1/2 in. male siamese
19. Raw water pump cable
end, 1 1/2 in. female npsh
20. Raw water pump discharge
41.
Distribution pump
hose, 1 1/2 in.
wheel chocks behind and in front of the rear dual wheels. Place a leveling jack under each corner of the van body.
Adjust jacks until spirit levels (8, fig. 1-2) indicate that the van is level. Weather permitting, open side panels (2, fig. 2-1)
to provide better accessibility to the installed equipment. Remove ladder assemblies (10) and install them at the
entrances to van body.
(2)
Unload and unpack supporting equipment such as distribution pumps, hoses, lines, collapsible tanks, and
chemical supplies from the van body and cargo trailer.
2-15
