Engine
Disassembly and Assembly
3.
Remove governor spring (6), from guide (7).
4.
Remove seat (8) from guide (7).
5.
Remove the bolts, cover assembly (9) and the
gasket.
6.
Use tooling (A) to remove seal (10) from cover
(9).
7.
Remove low idle adjustment screw (12) and
spring (11) from the housing.
8.
Remove shaft assembly (14), lever (13) and
lever (15) from the housing.
9.
Remove two snap rings from pins (17), and
remove pins (17). Remove plates (16) and stop (18)
from the shaft assembly.
17
