Engine
Disassembly and Assembly
14.
Remove seal (29) and adjustment screw (30) for
high idle.
15.
Remove two bolts (31), housing (32) and the
gasket from the fuel injection pump housing.
16.
Remove bolts (33) and torque control group (34).
17.
Disassemble the torque control group and
inspect the spacer, spring and insulator for damage or
wear.
18.
Remove bolts (36) and block (35) for the full load
step from the housing.
19.
Remove the bolt that holds collar (37) to bolt
(39). Remove collar (37) and spring (38) from bolt (39)
from the block.
20.
Remove the stop screw from collar (37) if a
replacement is necessary.
21.
Remove bolts (41) and governor servo (40) from
the fuel injection pump.
19
