Engine
Disassembly and Assembly
Camshaft Bearings
Remove Camshaft Bearings 1211-011
Tools Needed
A
8S2241
Camshaft Bearing Installation And
1
Removal Group
8H684
Ratchet Wrench
1
START BY:
a. remove flywheel housing
b. remove oil pan plate
c. remove camshaft
1. Remove the camshaft bearings from the cylinder block
with tooling (A). Start with the front bearing and work to
the rear.
Install Camshaft Bearings 1211-012
Tools Needed
A
8S2241
Camshaft Bearing Installation And
1
Removal Tool
8H684
Ratchet Wrench
1’
1. Use tooling (A) to install the camshaft bearings in both
the 3304 and 3306 cylinder blocks.
2. Install the camshaft bearings in the 3304 cylinder
block as follows:
a. Install the front bearing to a depth of 0.57 ± 0.5 mm
(.022 + .02 in.) and with the oil holes in a horizontal
position and the joint at the top of the engine. The joint
can not be more than 15° from vertical in either direction.
b. Install the center bearing to a depth of 303.2 + 0.5 mm
(11.94 + .02 in.) and with the oil hole in alignment with
the oil hole in the cylinder block.
c. Install the rear bearing-to a depth o 604.9 + 0.5 mm
(23.81 + .02 in.) and with the oil hole in alignment with
the oil hole in the cylinder block.
113
