Engine
Disassembly and Assembly
Balancer Shafts (3304)
Remove Balancer Shafts (3304)
1220-011
START BY
a.
remove timing gear cover
b.
remove oil pump
NOTE: The oil pan plate has been removed only for
photo illustration.
1.
Remove plates (2) that hold the balancer shafts in
the cylinder block.
2.
Remove balancer shafts (1) from the cylinder block.
Install Balancer Shafts (3304)
1220-012
NOTE: The oil pan plate has been removed only for
photo illustration.
1.
Install the balancer shafts in each side of the cylinder
block.
2.
Install plates (1) and the bolts that hold the balancer
shafts in position in the cylinder block.
NOTICE
Make sure the balancer shafts are in time before
installing the oil pump. See Install Oil Pump.
END BY:
a.
install oil pump
b.
install timing gear cover
110
