EngineDisassembly and Assembly7.Turn the flywheel in the direction of engine rotationuntil the timing bolt can be installed in the flywheel andthe "C" marks are in alignment. This will remove all ofthe backlash from the timing gears.8.Tighten bolt (7) to a torque of 270 25 N•m (200 18 Ib.ft.).9.Remove tooling (B) and (C). Remove the timing boltfrom the flywheel. Install the covers on the flywheelhousing and fuel injection pump housing. Install the plugin the flywheel housing.END BY:a.install timing gear coverTiming Gear PlateRemove And Install Timing GearPlate 1162-010START BY:a.remove timing gearsb.remove fuel injection pump housing and governor1.Remove all bolts (1) that hold the timing gear plate tothe engine.2.Remove timing gear plate (2) and the gasket fromthe engine.3.Put the gasket and timing gear plate (2) In positionon the engine, and install the bolts that hold it.4.Trim the gasket so it is even with the bottom of thecylinder block.END BY:a.install fuel injection pump housing and governorb.install timing gears109
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
