Engine
Disassembly and Assembly
4.
Remove bolts (5), the washers and cover (6) from
the water pump.
5.
Loosen bolt (7) 6.4 mm (.25 in.). Hit the bolt with a
soft hammer to remove impeller (8) from the shaft.
6.
Remove the spring and seal assembly from the
shaft.
7.
Remove bearing (9) and shaft (10) as a
unit.
Disassembly and Assembly 8. Use tooling (A), (C) and
a press to remove bearing (9) from shaft (10).
9.
Remove the ceramic ring and seal (11) from the
housing.
10. Remove lip-type seal (12) from the housing with tool
(C).
129
