Engine
Disassembly and Assembly
Water Pump
10. Make an alignment of pins (12) on gear (11) and the
holes in shaft (1). Put the gear and bearing in position on
the shaft, and install the washer and bolt that hold them
together.
END BY:
a.
install water pump
Oil Pan Remove And Install Oil Pan 1302-010
1.
Drain the oil from the engine.
2.
Remove tube (4) and dipstick tube (3) from the
engine.
3.
Remove bolts (1) and the washers that hold the oil
pan in position. Remove oil pan (2) and the gasket from
the oil pan plate.
4.
Put the gasket and oil pan (2) in position on the oil
pan plate, and install the washers and bolts (1) that hold
them.
5.
Install dipstick tube (3) and tube (4) on the engine.
6.
Fill the crankcase with oil to the correct level. See
the Maintenance Guide.
132
