Engine
Disassembly and Assembly
Oil Pan Plate
Remove And Install Oil Pan Plate 1302-010
START BY:
a.
remove oil pan
1.
On 3306 Engines only, remove the three bolts, locks
and suction bell assembly (1) from the oil pan plate and
the oil pump.
2.
Remove bolts (2) that hold the elbow to the oil pump.
3.
Remove bolts (3), oil pan plate (4) and the gasket
from the engine.
4.
On both sides of the engine, at locations (A) and (B),
apply 3S6252 RTV Silicone Adhesive/Sealant.
5.
Put the gasket and oil pan plate (4) in position on the
engine, and install bolts (3) to hold them.
6.
Install bolts (2) that hold the elbow to the oil pump.
7.
On 3306 Engines only, install the gasket, suction bell
(1) and the locks and bolts that hold them.
END BY:
a.
install oil pan
Oil Pump (3304)
Remove Oil Pump (3304) 1304-011
START BY: a.
remove oil pan
1.
Remove bolts (3) that hold the elbow to the oil pump.
Oil pump idler gear (2) can tall off the oil pump when
the oil pump is removed. To prevent injury, always
hold the gear on the oil pump when it is removed
from the engine.
2.
Remove the bolts, locks and washers that hold oil
pump (1) to the engine. Remove the oil pump from the
engine.
133
