TM 10-4320-317-13
NOTE
If tank trucks are to be filled, reducers to be installed on discharge hoses to match truck
fittings.
When reducers are installed on hose ends, water flow is controlled by 2 inch gate valves.
The anti-seizing tape is to be wrapped in the same direction as the pipe threads.
(37) Wrap anti-seize tape (Item 10, Appendix E) around threads of male end on two reducers (1, Figure 2-26).
Screw reducers (1) into two hose swivels (2).
(38) Wrap anti-seize tape (Item 10, Appendix E) around threads of hose swivels (2). Screw hose swivels (2) into
each of the two nozzles (3).
Figure 2-26. Distribution Point
(39) Push cam arms on two reducers (1) forward to open position.
2-48
