TM 10-4320-317-13
Figure 2-38. Disassembly of Suspension Device
(12) Remove turnbuckles (10) from ends of wire rope (8).
(13) Remove tumbuckles (10) from stakes (11). Remove stakes (11).
(14) Pull wire rope (8) across span and coil it.
(15) Remove both damp assemblies and thimble (15) by removing nuts (12) from U-bolts (13).
(16) Install one damp (14) and two nuts (12) onto each U-bolt (13).
(17) Remove pulley blocks (9) from tripods (5 and 6).
(18) Disassemble tripods (5 and 6).
(19) Locate chests for suspension kits and remove any contents.
(20) Wipe out inside of chest and clean kit items.
2-60
