TM 10-4320-317-13
3-5.
MAINTENANCE OF HOSE ASSEMBLIES. - (Cont)
(d)
Inspect inside of hose ends (2) for further damage. Cut hose back again, as required, to reach an
undamaged area.
(e)
Drain hose ends (2) and wipe dry.
Figure 3-2. Removing Damaged Hose Section
(f)
Install mid-section adapter assembly between hose ends as follows (Figure 3-3):
Figure 3-3. Mid-section Hose Adapter Assembly
1
Loosen nuts (1) and bolts (2) fully, between damps (3).
3-6
