TM 10-4320-317-13
3-7.
MAINTENANCE OF NOZZLE STAND ASSEMBLY.
This task covers:
a. Disassemble
c. Repair
b. Inspect
d. Assembly
INITIAL SETUP
Tools
Pliers (Item 136, Appendix C)
a. DISASSEMBLE (Figure 3-7).
Figure 3-7. Nozzle Stand Assembly
(1)
Remove three S-hooks (1) from clips (6).
(2)
Remove three chains (2) from three S-hooks (1).
(3)
Remove cotter pin (3) from each straight pin (4).
(4)
Remove straight pin (4) from each clevis (5).
b.
INSPECT.
Inspect stand assembly for cracked or separated welds. If damaged, replace nozzle stand assembly.
3-11
