TM 10-4320-317-13
3-5. MAINTENANCE OF HOSE ASSEMBLIES. - (Cont)
(b)
Inspect inside of hose end (3) for further damage. Cut hose back again, as required, to reach an undamaged
area.
(c)
Drain hose end (3) and wipe dry.
(d)
Loosen nuts (4) and bolts (5) fully, between clamps (6).
(e)
Inspect for missing or damaged O-rings (7) on adapter (8). Replace missing or damaged O-rings (7).
(f)
Apply anti-seize lubricant to O-rings (7).
(g)
Insert hose end (3) between damps (6) and onto adapter (8).
CAUTION
Do not overtighten nuts and bolts. Overtightening may damage O-rings and adapter causing leaks.
(h)
Tighten nuts (4) and bolts (5) alternately and evenly. Do not overtighten.
3-9
