TM 10-4610-229-24
2-54. FAN REPLACEMENT/REPAIR (CONT)
b. Disassembly
1
Remove closing cap from front of fan.
2
Remove nut from rear of fan.
3 Remove lockwasher, washer, O-ring, and bushing from rear of fan.
4
Pull fan through front of housing.
5
Remove front bushing from fan housing.
6
Remove bolt and flatwasher.
7
Remove snap ring.
8
Remove three bolts and flatwashers.
9
Remove pulley from fan.
10
Press bearing shaft from pulley.
11
Press out bearings and bushings.
2-122
