TM 10-4610-229-24
2-66. SKID-MOUNTED PRETREATMENT ASSEMBLY REPAIR (CONT)
CAUTION
Overtightening nuts may cause gasket to pinch. Tighten nuts only until housings are firmly
together (metal-to-metal).
27
Install lower grooved pipe coupling halves. Install two bolts and nuts.
28
Install upper grooved pipe coupling halves. Install two bolts and nuts.
g. Pipe Replacement/Repair
1
Remove flowmeter and temperature gage (para 2-67).
2
Remove safety relief valve (subpara b).
3
Remove tubing from pipe as required. Check tubing for leaks. Replace as required.
2-149