TM 10-4610-229-24
2-76. SKID-MOUNTED HIGH PRESSURE PUMP ASSEMBLY REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP :
Use With
Supplies
High Pressure Pump Assembly
Fuel, item 11, appendix C
Silicone lubricant, item 22,
Tools
appendix C
Common No. 1 Organizational
References
Maintenance Automotive
Maintenance and Repair Shop
TM 10-4610-229-10 Fuel Filling
Equipment, item 11, appendix B
Hose wrench, item 8, appendix B
Lifting device, item 13,
appendix B
a.
Removal
1
Unplug pretreatment assembly power cable from high pressure pump assembly outlet.
2
Place pan under fuel tank drain. Remove plug from bottom of fuel tank. Drain fuel. Install plug.
3
Remove suction hose from pump inlet.
2-195
