TM 10-4610-229-24
2-77. POWER CABLE ASSEMBLY REPLACEMENT/REPAIR (CONT)
6
Remove two screws from side of socket.
7
Tag and disconnect wires.
8
Remove two screws. Remove connector. Remove battery cable from housing.
9
Remove two housing mounting screws, flatwashers, and lockwashers. Remove conduit outlet.
b.
Installation
1
Install housing. Install two lockwashers, flatwashers, and housing mounting screws.
2
Install battery cable in housing. Install connector and two screws.
3
Connect wires to socket. Remove tags.
4
Remove two screws from side of socket.
5
Install gaskets and aline socket. Install two socket mounting screws.
6
Install cover. Install four mounting screws.
7
Install power cable to battery. Install power cable wires on terminals. Install terminal nuts.
8
Install tie wraps as needed.
9
Plug power cable in socket.
2-78. INSTRUMENT PANEL REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Use With
Equipment
Condition
High Pressure Pump Assembly
Para
Condition Description
Tools
2-16
Battery disconnected.
Common No. 1 Organizational
Supplies
Maintenance Automotive
Maintenance and Repair Shop
Solder, item 31, appendix C
Equipment, item 11, appendix B
Tags, item 34, appendix C
2-198
