TM 10-4610-229-24
2-77. POWER CABLE ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP :
Use With
Supplies
High Pressure Pump Assembly
Tags, item 34, appendix C
Tools
General Mechanic's Automotive
Tool Kit, item 10, appendix B
WARNING
To prevent electric shock, be very careful when disconnecting wires from battery terminals.
1
Unplug power cable from socket.
2
Remove terminal nuts. Remove battery cable wires from battery terminals.
3
Cut tie wraps as needed. Move battery cable away from battery.
4
Remove four mounting screws. Remove cover.
5
Remove two socket mounting screws. Remove gaskets and move socket aside.
2-197
