TM 10-4610-229-24
2-79. INSTRUMENT PANEL ASSEMBLY REPAIR (CONT)
d.
Fuel Pressure Gage Replacement
1 Remove nut, bolt, and flatwasher. Remove two screws, nuts, and lockwashers. Remove lower rear cover.
WARNING
To prevent fire or explosion, do not bring sparks or open flame near diesel fuel.
2
Remove fuel line. Pry off retainer.
3
Pull fuel pressure gage through front of panel.
4
Remove elbow from gage.
5
Install elbow on gage.
6
Install fuel pressure gage. Press on retainer.
7
Install fuel line.
8
Install lower rear cover. Install bolt, flatwasher, and nut. Install two lockwashers, screws, and nuts.
9
Connect battery (para 2-16).
2-204
