CYLINDER HEAD REPAIR - cont - TM-10-4610-229-24

CYLINDER HEAD REPAIR - cont - TM-10-4610-229-24_489

TM-10-4610-229-24 Water Purification Unit Reverse Osmosis 150 000 GPD Skid-Mounted PD81146 (4610-01-121-0161) Manual
Page Navigation
484

TM 10-4610-229-24 3-65. CYLINDER HEAD REPAIR (CONT) 2 Inspect valve guides for damage. Replace as required. 3 Apply engine oil (MIL-L-2104) to valve guides. 4 Using driver and bushing, drive valve guides into place. 5 Check inside diameter of valve guide. Diameter should be 0.3725-0.3745 in. The maximum diameter for used guides is 0.3758 in. 6 Install valves (para 3-62). c. Bridge Dowels Replacement 1 Using dowel puller and extractor, pull bridge dowel from cylinder head. 2 Inspect bridge dowels for damage. Replace as required. 3 Using dowel driver, drive bridge dowel into place in cylinder head. 4 Install valves (para 3-62). 3-173

Privacy Statement
Press Release
Contact