CYLINDER HEAD REPAIR

CYLINDER HEAD REPLACEMENT (CONT) - TM-10-4610-229-24_487

CYLINDER HEAD REPAIR - cont - TM-10-4610-229-24_489

TM-10-4610-229-24 Water Purification Unit Reverse Osmosis 150 000 GPD Skid-Mounted PD81146 (4610-01-121-0161) Manual
Page Navigation
482

TM 10-4610-229-24 3-64. CYLINDER HEAD REPLACEMENT (CONT) 8 Install rocker arms and push rods (para 3-61). 9 If manifold studs were removed, torque studs to 15-25 ft lb. 10 Torque 3/8 in. bolts 27-37 ft lb. 11 Install two supports. Install four screws. 12 Install clamp. 13 Adjust valves (para 2-104). 14 Install water temperature regulator (para 2-100). 15 Install intake manifold (para 2-101). 16 Install exhaust manifold (para 2-102). 17 Install air cleaner (para 2-84). 18 Install fuel injection lines (para 2-95). 3-65. CYLINDER HEAD REPAIR This task covers: a. Valve Seat Inserts Replacement b. Valve Guides Replacement c. Bridge Dowels Replacement INITIAL SETUP: Use With Tools (Cont) High Pressure Pump Assembly Driver, item 36, appendix B Bushing, item 29, appendix B Tools Puller, item 57, appendix B Extractor, item 39, appendix B General Mechanic's Automotive Dowel Driver, item 37, appendix B Tool Kit, item 10, appendix B Common No. 1 Organizational Supplies Maintenance Automotive Maintenance and Repair Shop Oil, item 24, appendix C Equipment, item 11, appendix B Handle Assembly, item 43, Equipment appendix B Condition Intake extractor, item 41, Para Condition Description appendix B 3-62 Valves removed. Intake extractor, item 40, appendix B 3-171

Privacy Statement
Press Release
Contact