TM 10-4610-229-24
3-67. TIMING GEAR COVER REPLACEMENT(CONT)
a. Removal
1
Loosen line nut. Disconnect oil pressure line.
2
Remove bolts and back cover. Remove and discard gasket.
3
Remove bolts and small cover. Remove and discard gasket.
4
Remove timing gear cover mounting bolts.
5
Remove four bolts and support bracket.
6
Remove timing gear cover and gasket. Discard gasket.
b. Installation
1
Clean gasket mounting surfaces.
2
Install gasket and timing gear cover.
3
Install timing gear cover bolts.
4
Trim timing gear cover gasket even with bottom of cylinder block.
3-175
