TM 10-4610-229-24
2-18. INSTRUMENT PANEL REPAIR (CONT)
5
Connect two wires.
6
Remove tags.
7
Aline holes on instrument panel and mounting bracket. Install four flatwashers, bolts, lockwashers, and nuts.
8
Connect battery (para 2-16).
c.
Fuel Level Gage Replacement
1
Remove four nuts, lockwashers, bolts, and flatwashers. Remove instrument panel from mounting bracket.
WARNING
To prevent electric shock, make sure battery is disconnected.
2
Tag and disconnect two wires.
3
Remove two nuts, lockwashers, and retaining bracket. Remove fuel gage from front of instrument panel.
4
Install fuel gage. Install bracket, two lockwashers, and nuts.
5
Connect two wires.
6
Remove tags.
7
Aline holes on instrument panel and mounting bracket. Install four flatwashers, bolts, lockwashers, and nuts.
2-51