TM 10-4610-229-24
2-18. INSTRUMENT PANEL REPAIR (CONT)
NOTE
This procedure is the same for both switches.
e.
Ignition and Light Switches Replacement
1
Remove four nuts, lockwashers, bolts, and flatwashers. Remove instrument panel from mounting bracket.
2
Remove boot, nut, and nameplate from switch. Pull switch from rear of instrument panel.
WARNING
To prevent electric shock, make sure battery is disconnected.
3
Remove starwasher and nut.
4
Tag and desolder wires. Remove switch.
5
Install nut and starwasher on switch.
6
Install ignition switch. Install nameplate, nut, and boot.
7
Solder wires in place.
8
Remove tags.
9
Aline holes on instrument panel and mounting bracket. Install four flatwashers, bolts, lockwashers, and nuts.
2-53
