TM 10-4610-229-24
2-27. FUEL SOLENOID REPLACEMENT/REPAIR (CONT)
c.
Assembly
1
Install gasket, tube core assemblies, and nut in body.
2
Install coil assembly.
3
Install nameplate, washer, and screw on coil assembly.
d.
Installation
1
For raw water pump assembly: Install two hose fittings.
2
Install valve. Install two flatwashers and mounting screws.
3
Install fuel lines.
4
For boost pump assembly: Tighten two fuel lines.
5
For raw water pump assembly: Tighten two hose clamps.
6
Install two wires, lockwashers, and nuts. Remove tags.
7
Connect battery (para 2-16).
8
For raw water pump assembly: Fill fuel tank. (See TM 10-4610-229-10.)
9
For boost pump assembly: Open fuel shutoff valve.
2-28. OIL BATH AIR FILTER REPLACEMENT/REPAIR
This task covers:
a.
Removal
c.
Assembly
b.
Disassembly
d.
Installation
INITIAL SETUP
Use With
Supplies
Raw Water Pump Assembly
Oil, item 24, appendix C
Rags, item 29, appendix C
Tools
References
General Mechanic's Automotive
Tool Kit, item 10, appendix B
TM 10-4610-229-10
Air Filter
Service
2-76
