TM 10-4610-232-34
Figure 2-36. Motor Starter MS8-2S
Loosen two captive screws (6) and remove contact cover (7).
Remove moveable contact assembly (8).
Press down on moveable contacts (9) and remove springs ( 10) and contacts (9)
(4)
(5)
(6)
o. Refer to Figure 2-37, disassemble motor starters MS1 and MS2 by removing two screws (1 ) and removing
overload heater (2).
p. Remove reset (3) on motor starter MS2 by pressing tab (4) and pulling reset up and out.
Figure 2-37. Motor Starters MS1 and MS2
2-140 Change 1
