TM 10-4610-239-24
TM 08580B-24/3
REMOVAL.
a.
At both ends of all four R.O. pressure tubes, loosen eight hose clamps (1) and remove eight flexible tubes (2).
b.
At aft end of top R.O. pressure tube, remove two nuts (3) and screws (4), clamp (5), and gasket (6).
c.
At aft end of middle 2 R.O. pressure tubes and at forward end of all 4 tubes, remove 12 nuts (7)
and screws (8), 6 clamps (9) and gaskets (10), and 3 pipe sections (11).
d.
At aft end of bottom R.O. pressure tube, remove four nuts (12) and screws (13), two clamps (14)
and gaskets (15), and pipe section (16).
INSTALLATION.
a.
At aft end of bottom R.O. pressure tube, position pipe section (16) and install two gaskets (15)
and clamps (14) and four screws (13) and nuts (12).
b.
At aft end of middle 2 R.O. pressure tubes and at forward end of all 4 tubes, position 3 pipe
sections (11) and install 6 gaskets (10) and clamps (9) and 12 screws (8) and nuts (7).
c.
At aft end of top R.O. pressure tube, install gasket (6), clamp (5), and two screws (4)and nuts (3).
d.
At both ends of all four R.O. pressure tubes, install eight flexible tubes (2) and tighten eight hose clamps (1).
2-168
