TM 10-4610-239-24
TM 08580B-24/3
REMOVAL. (Cont)
c. Remove two nuts (1), lockwashers (2), bracket (3) and flowmeter (9) from panel (14). Discard lockwashers.
d. Remove two adapters (15) from flowmeter (9).
INSTALLATION.
NOTE
Apply antiseize tape to threads on all male pipe fittings before
installation.
a. Install two adapters (15) on flowmeter (9).
b. Position flowmeter (9) in cutout on control panel (14).
c.
Install gasket (13), clamp (12), two bolts (11), and nuts (10).
d. Install gasket (8), clamp (7), two bolts (6), and nuts (5).
e. Position bracket (3) on two studs (4) and install two new lockwashers (2) and nuts (1).
2-235
