TM 10-4610-239-24
TM 08580B-24/3
REMOVAL.
a.
Punch out roll pin (1) and remove valve handle (2).
b.
Remove four nuts (3) and screws (4) and two clamps (5) and gaskets (6).
c.
Remove two screws (7), lockwashers (8), flat washers (9), bar (10), and needl valve (11) with two adapters (12).
e
d.
Remove two adapters (12).
INSTALLATION.
NOTE
Apply antiseize tape to pipe threads before installation.
a.
Install two adapters (12).
b.
Position needle valve (11) and bar (10) and install two screws (7), flat washers (9), and lockwashers (8).
c.
Install two gaskets (6), two clamps (5), four screws (4), and four nuts (3).
d.
Position handle (2) and install roll pin (1).
2-259
