TM 10-4610-239-24
TM 08580B-24/3
ADJUSTMENT.
NOTE
There are four manual stroke adjustment assemblies. All are adjusted the same. One is shown.
Tag flexible tubes before disconnecting.
a.
Disconnect flexible tubing connectors (10) and (11) from four chemical feed cans.
b.
Place flexible tubing connectors (10) and (11) associated with manual stroke adjustment assembly being adjusted
into bucket of water.
c.
Apply power to ROWPU. Refer to power source manual.
d.
Set ball valve control handle (12) to PRIME position.
e.
At control box, momentarily set CHEMICAL FEED PUMP switch to STUART position then let it return to RUN
position.
f.
Loosen grub screw (7) and set adjustment head (1) to zero setting.
2-280
