TM 10-4610-239-24
TM 08580B-24/3
ADJUSTMENT. (Cont)
g.
Turn flexible shaft collar (14) counterclockwise until a steady flow of water comes out of flexible tubing connector
(10). Then turn flexible shaft collar slowly clockwise until flow just stops.
h.
Ensure adjustment is still at zero and tighten grub screw (7).
i.
At control box, set CHEMICAL FEED PUMP switch to STOP position.
j.
Shut down power to ROWPU. Refer to TM 10-4610-239-10.
k.
Install flexible tubing connectors (10) and (11) as tagged.
2-281
