TM 10-4610-239-24
TM 08580B-24/3
3-17. REPAIR CABLE ASSEMBLIES.
This task covers: a. Test cable assembly b. Splice Wire c. Replicate Connector (Multipin)
INITIAL SETUP.
a. Tools.
Tool Kit (Appx B, Sect III, Item 10).
Multimeter (Appx B, Sect III, Item 6)
Crimping Tool (Appx B, Sect III, Item 6)
Wire Stripper (Appx B, Sect III, Item 6)
Pin Removal Tool (Appx B, Sect III, Items 2 and 9)
Pin Insertion Tool (Appx B, Sect III, Items 2 and 9)
Soldering Kit (Appx B, Sect III, Item 6).
Electrical Repair Kit (Appx B, Sect III, Item 6).
b. Materials/Parts
Tape, Electrical (Appx C, Sect II, Item 18). Solder
c.
Equipment Condition.
Cable assembly removed: junction box (paragraph 3-41);
control box (paragraph 3-32); R.O. pump motor (paragraph 2-124);
raw water pump motor (paragraph 2-133); backwash pump motor
chemical feed pump motor (paragraph 3-50); distribution pump motor
3-113
