TM 10-4610-239-24
TM 08580B-24/3
3-35.
REPLACE INDICATOR LAMPHOLDERS.
This task covers:
a. Removal.
b. Installation.
INITIAL SETUP.
a. Tools. Tool Kit (Appx B, Sect III, Item 10).
Multimeter (Appx B, Sect III, Items 6 and 9).
b. Equipment Condition. Control box assembly removed (paragraph 3-32).
REMOVAL.
NOTE
There are nine lampholders. All are removed the same. One is shown.
Tag all wires before removal.
a. Remove 14 screws (1), lockwashers (2), and flat washers (3). Lower control box cover (4).
b. From inside control box assembly, remove two screws (5) and three wires (6) from lampholder (7).
3-169
