TM 10-4610-239-24
TM 08580B-24/3
DISASSEMBLY. (Cont)
g. Remove two nuts (1), screws (2), lockwashers (3), and bracket (4). Discard lockwashers.
h. Remove gasket (5) from control box cover (6).
CLEANING.
a. Using soap solution, clean control box assembly and control box cover. Wipe dry with clean cloth.
b. Clean attaching hardware.
INSPECTION.
a. Inspect control box assembly and control box cover for dents, cracks, and excessive corrosion. Repair
or replace as required.
b. Inspect cover gasket for cracks, deterioration, and general serviceability. Replace as required.
c.
Inspect attaching hardware for damage and corrosion. Replace as required.
ASSEMBLY.
a. Install gasket (5) on control box cover (6).
b. Position bracket (4) on control box cover (6) and install two screws (2), new lockwashers (3), and nuts
(1).
c.
Install wiring harnesses W1, W2, and W58. Refer to paragraph 3-38.
d. Install receptacle connectors. Refer to paragraph 3-37.
e. Install terminal boards TB5, TB6, and TB8. Refer to paragraph 3-36.
f.
Install nine indicator lampholders. Refer to paragraph 3-35.
g. Install 11 switches. Refer to paragraph 3-34.
h. Install electrical relays K10 and K11. Refer to paragraph 3-40.
3-165
