TM 10-4610-239-24
TM 08580B-24/3
INSTALLATION.
WARNING
High voltages in this equipment can cause serious injury or death. Be certain
that all power is removed before performing maintenance.
NOTE
For installation of circuit breaker, go to step b.
For installation of circuit breaker plate, go to step a.
a. Position insulating plate (16) on circuit breaker plate (6).
NOTE
For installation of circuit breaker plate, install all circuit breakers.
To install CB7 thru CB9, go to step b.
To install CB3 thru CB6, go to step c.
To install CB 1 or CB2, go to step d.
b. Position circuit breaker (15). Install two screws (11), new lockwashers (12), and flat washers (13). Go
to step e.
c. Position circuit breaker (14). Install six screws (11), new lockwashers (12), and flat washers (13). Go
to step f.
d. Position circuit breaker (14). Install six screws (11), new lockwashers (12), and flat washers (13). Go
to step g.
e. Install two terminal lugs (9) as tagged, nuts (7), and two flat washers (8).
f.
Install 9 terminal lugs (9) as tagged, 12 flat washers (8), and 6 nuts (7).
g. Install 12 flat washers (8), 11 terminal lugs (9) as tagged, and 6 nuts (7).
h. Position circuit breaker plate (6) flush with four standoffs (5). Install four screws (3) and flat washers (4).
i.
Position all circuit breakers to OFF.
j.
Close junction box cover (2) and tighten 13 rotary fasteners (1).
3-190
