TM 10-4610-239-24
TM 08580B-24/3
DISASSEMBLY. (Cont)
g. Remove receptacle connectors. Refer to paragraph 3-37.
h. Remove terminal boards. Refer to paragraph 3-36.
i.
Remove wiring harnesses and wire leads. Refer to paragraph 3-38.
CLEANING.
a. Using soap solution, clean electrical junction box assembly. Wipe dry with clean cloth.
b. Clean attaching hardware.
INSPECTION.
a. Inspect electrical junction box assembly and junction box cover for dents, cracks, and excessive
corrosion. Repair or replace as required. To replace junction box cover, refer to paragraph 2-119. To
repair junction box cover, refer to paragraph 2-120.
b. Inspect cover gasket for cracks, deterioration, and general serviceability. Replace as required.
c.
Inspect attaching hardware for damage and corrosion. Replace as required.
ASSEMBLY.
a. Install wiring harnesses and wire leads. Refer to paragraph 3-38.
b. Install terminal boards. Refer to paragraph 3-36.
c.
Install receptacle connectors. Refer to paragraph 3-37.
d. Install motor controllers K3 thru K7. Refer to paragraph 3-48.
e. Install motor controllers K1 and K2. Refer to paragraph 3-46.
f.
Install utility receptacle. Refer to paragraph 3-45.
g. Install control relays K8 and K9. Refer to paragraph 3-44.
h. Install circuit breakers and circuit breaker plate. Refer to paragraph 3-43.
i.
If junction box cover was removed for repair, install junction box cover. Refer to paragraph 2-118.
j.
Close junction box cover (2) and turn 13 rotary fasteners (1).
3-187
