TM 10-4610-239-24
TM 08580B-24/3
REMOVAL.
WARNING
High voltages in this equipment can cause serious injury or death. Be certain
that all power is removed before performing maintenance.
a. Turn 13 rotary fasteners (1) and open junction box cover (2)
.
b. Remove four screws (3) and flat washers (4) from standoffs (5).
c.
Tilt circuit breaker plate (6) forward to reach wires and attaching hardware.
NOTE
Tag all wires before removal.
To remove circuit breaker plate, remove all circuit breakers.
To remove CB1 or CB2, go to step d.
To remove CB3 thru CB6, go to step e.
To remove CB7 thru CB9, go to step f.
d. Tag 11 wires and remove 6 nuts (7), 12 flat washers (8), 11 terminal lugs (9). Go to step g.
e. Tag 9 wires and remove 6 nuts (7), 12 flat washers (8), and 9 terminal lugs (9). Go to step g.
f.
Remove two nuts (7), four flat washers (8), and two terminal lugs (9). Go to step h.
g. Remove six screws (11), lockwashers (12), flat washers (13), and circuit breaker (14).
Discard
lockwashers. This completes removal of circuit breaker.
h. Remove two screws (11), lockwashers (12), flat washers (13), and circuit breaker (15).
Discard
lockwashers. This completes removal of circuit breaker.
i.
Remove circuit breaker plate (6) and insulating plate (16).
3-189
