TM 10-4610-240-10
TM 08580C-10/1
T.O. 40W4-13-21
h. Start R.O. Pump.
(1) Make sure VENT VESSELS VALVE (figure 2-5) is open.
WARNING
To prevent injury to personnel, do not stand in front of the vent pipe when venting pulse dampener.
(2) Set VENT PULSE DAMPENER valve to OPEN.
(3) Push R.O. Pump RESET switch upward. R.O. pump LOW PRESSURE lamp goes OFF and s itch
w
returns to ON.
(4) Hold R.O. PUMP switch (figure 2-57) upward to START.
(5) As soon as R.O. PUMP lamp comes on, release switch.
(6) Switch will return to RUN.
FIGURE 2-57. CONTROLS, R. O. PUMP
FIGURE 2-58. R. O. PUMP AND MOTOR
(7) Set the VENT PULSE DAMPENER valve (figure 2-59) to CLOSE as soon as you see a full stream of water
coming from the vent pipe (figure 2-58).
2-62
