ARMY TM 10-4610-309-14
MARINE CORPS TM 10802A-14/1
0062 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
UNIT MAINTENANCE PROCEDURES
CONTROL INSTRUMENTS
MF FILTRATE PRESSURE
TRANSMITTER PT-102
MF FEED PRESSURE
TRANSMITTER PT-101
RO FEED PRESSURE
TRANSMITTER PT-302
RO FEED PRESSURE
TRANSMITTER PT-201
RO FEED TANK LEVEL
TRANSMITTER LT-201
RO FEED TEMPERATURE TRANSMITTER TT-201
Figure 12. Location of MF and RO System Transmitters.
3. Clean the area around the removed transmitter and inspect the area for corrosion, cracks or other
conditions that could cause the transmitter or pipe connection to leak or malfunction.
4. Install the new transmitter as follows:
a. Wrap antiseizing tape on the transmitter threads and thread the transmitter into position.
NOTE
Be careful not to over-tighten the transmitter or back off the transmitter after
tightening as this could weaken the pipe tape and cause leakage.
b. Reconnect the electrical cable to the transmitter.
5. Operate the TWPS and check for leaks and proper operation.
END OF WORK PACKAGE
0062 00-24
