TM 10-4610-310-14
0013 00
LONG TERM SHUTDOWN/PRESERVATION - continued
12. Connect fabric hose (green) to male filtrate bag inlet connection on the UF and to the cleaning adapter on
the RO inlet. This allows the preservative to flow through the UF and into the RO module.
13. Connect the RO reject hose (red) into the cleaning tank inlet. RO will not be making any significant amount of
product water. This allows the preservative to be re-circulated.
1
CLEANING TANK OUTLET
2
UF INLET
3
UF REJECT
4
FILTRATE INLET HOSE
5
RO INLET
6
RO REJECT
7
CLEANING TANK INLET
Figure 11. Preservation Piping Layout.
14. Ensure circuit breaker (CB 1) is at OFF.
15. Disconnect the BOOSTER pump cable from the control panel and cap it.
16. Switch the BACKWASH pump cable from its place to the BOOSTER pump cable connection.
