TM 10-4610-310-14
WP 0048 00
ACCURATE CALIBRATION - continued
4. Before inserting the vial into the meter, wipe it with a soft, lint-free cloth, HI 93703-70, or equal. Handle vials
so that no fingerprints can get on the areas where light passes [approximately 1 inch (2 cm) from the bottom
of the vial].
VIEWING THE CALIBRATION DATE
1. Turn the meter on and wait for the display to show " - - - -".
----
2. Press and hold the DATE/⇒ key. A "MM.DD" message appears while the key is held.
09.02 DATE
NOTE
The displayed date is the date that was input by the user at the beginning of the last
calibration.
END OF WORK PACKAGE
0048 00-4
