TM 10-4610-310-14
0047 00
INSPECTION
1. Inspect rupture disc holders for corrosion or damage.
2. Discard rupture disc if corroded; the dome is damaged; or sealing surface is deformed.
INSTALLATION
Before installation, apply anti-seize tape on all male threads.
1. If removed, install inlet half (2) of the rupture disc holder into the piping (1).
2. Install rupture disc (3) into inlet half (2): the rupture disc should be bulging into the airside.
3. Install retaining ring (4) onto the rupture disc (3).
4. Install outlet half (5) of the holder and elbow (6).
5. Ensure that the outlet of the elbow fitting is facing down towards the ground.
END OF WORK PACKAGE
