TM 10-4610-310-14
0087 00
INSTALLATION
1. Ensure that all o-rings and gaskets are serviceable.
2. Install gasket (4) in the filtrate port (5). See Figure 2.
3. Install o-rings (3).
4. Install end caps (1) by tightening the nut (2). The nut should be hand tightened all the way and then use
the strap wrench to tighten it a quarter turn more.
5. Place the cartridge in its location.
6. Install u-bolts (9) and fasten with nuts (7) and washers (8).
7. Connect piping to the cartridge. See WP 0085 00.
a. Connect UF cartridge drain piping.
b. Connect fast flush piping.
c.
Connect filtrate/backwash piping
d. Connect UF reject piping.
END OF WORK PACKAGE
0087 00-3 / 4 blank
