TM 10-4610-310-14
0087 00
REMOVAL - continued
3. Disconnect piping attached to the cartridge. See WP 0085 00.
a. Disconnect UF cartridge drain piping.
b. Disconnect fast flush piping.
c.
Disconnect filtrate/backwash piping
d. Disconnect UF reject piping.
4. Remove nuts (7), washers (8) and U-bolts (9). See Figure 2.
5. Remove the UF cartridge from the module.
6. Remove the end caps (1) by unthreading the nuts (2).
Figure 2. Cartridge Mounting Hardware.
7. Remove the o-rings (3). Replace if damaged.
8. Remove the gasket (4) from the filtrate port (5). Replace if damaged.
9. Remove low point drain valve (6) only if necessary.
