TM 10-4610-310-14
0089 00
Temperature Gauge - continued
Remove the temperature gauge (1) from the thermowell fitting (2).
2.
Remove the thermowell (2) from the piping (3) only if necessary.
3.
Figure 6. Temperature Gauge
INSTALLATION
Differential Pressure Gauge
1. Refer to Figure 2 for this procedure section.
2. Install elbows (6) if necessary.
3. Install gauge in the panel.
4. Install tubing (5).
5. Install screws (3), washers (2), and nuts (1).
Feed Pressure Gauge
1. Refer to Figure 3 for this procedure section.
2. Install elbows (6) if necessary.
3. Install gauge (3) in the panel.
4. Install tubing (5) on the gauge.
5. Install screws (4), washers (2), and nuts (1).
0089 00-4
