TM 10-4610-310-14
0089 00
Feed Pressure Gauge - continued
2. Remove tubing (5) from gauge (3).
3. Remove gauge from the panel.
4. Remove elbows (6) only if necessary.
Backwash Pressure Gauge
1. Remove screws (6), nuts (3), and washers (4).
Figure 4. Backwash Pressure Gauge
2. Remove tubing (2) from gauge (5).
3. Remove gauge (5) from the panel. Remove elbows (1) only if necessary.
Temperature Gauge
1. Temperature gauge is located below the reject outlet. See Figure 5.
REJECT
OUTLET
THERMOMETER
CARTRIDGE
Figure 5. Ultrafiltration Module Temperature Gauge.
0089 00-3
