TM 10-4610-310-14
0090 00
REMOVAL - CONTINUED
1. Remove dust plug (1) and female camlock (2) from the tee fitting (3). See Figure 4.
Figure 4. Flow Controller (8 GPM).
2. Remove nuts (6), washers (5), and U-bolt (4).
3. Remove pressure indicator tubing from the top branch of the tee fitting (3). Remove tee fitting (3).
4. Remove flow controller (7) from the check valve (9) by loosening at the union (8).
Level Switch
1. Level switch is located in the level switch piping. See Figure 5.
JUNCTION
LEVEL
BOX
SWITCH
PIPING
LEVEL
SWITCH
Figure 5. Level Switch Location.
0090 00-3
